Not sure an address belongs to VilaVPN?Check an address →

Ohjeet

Why can't I reach my printer, NAS or router page with the VPN on?

If a printer, NAS, Plex server, or the router admin page stops opening after VilaNet connects, that local address is likely going into the VPN. Turn on Bypass VPN for LAN in the rule settings, then reconnect once. The switch keeps private ranges out of the tunnel, including carrier-grade NAT (CGNAT), link-local addresses, and the matching IPv6 ranges.

After it is on, this phone or computer reaches local devices directly. Use the device's own IP address; do not rely only on a *.local name.

Turn it on

  1. Open VilaNet's rule settings.
  2. Turn on Bypass VPN for LAN. If settings are split into Connection, Split tunnel, Updates, and Account, a control you cannot find is usually under Split tunnel (including More routing settings) or Advanced Settings.
  3. Reconnect once. The switch does not affect the tunnel you already have open.
  4. Open the printer, NAS, Plex server, or router page by its IP address. A name that exists only as a .local host can still fail to resolve. Use the IP address.
  5. Load one ordinary HTTPS website and confirm the VPN itself still works.

How to tell it worked

VilaNet stays Connected, the local device opens by IP address, and one ordinary HTTPS website still loads.

Still not working?

What you seeWhat to do
Only the printer, NAS, Plex, or router admin page failsTurn on Bypass VPN for LAN, reconnect, then open the device by IP address
The device has only a *.local nameUse the device's IP address. The name can still fail to resolve
No website loads at allThis switch alone will not fix it. Continue with Connected but no internet
  • Every page fails, not only the printer or NAS: disconnect once, confirm ordinary internet works, then read Connected but no internet or the same guide.
  • An iPhone has no internet after connecting, or Personal Hotspot dies: read that article.
  • You want one website off the VPN, not a local device: read website rules.
  • VilaNet on a router uses that router's own screen. The Bypass VPN for LAN switch is in the VilaNet app on a phone or computer.
  • 0 käyttäjistä hyötyivät artikkelista
Auttoiko artikkeli teitä?

Related Articles

Cannot use the proxy on Firefox

Firefox does not always follow the system proxy, so it can show no connection while other apps...

Error code: "error: spawn unknown"

This error, fully known as "error: spawn unknown," typically occurs because VS Code cannot locate...

Can't access the internet on Windows after configuration?

Why does Windows show successful configuration but still can't access the internet?   First,...

v2rayN has stopped working on Windows

If you encounter "v2rayN has stopped working."   It may be due to an outdated version of...

It seems like an unknown error has occurred: Error: Command failed sysproxy.exe

It seems like an unknown error has occurred: Error: Command failed sysproxy.exe   Please check...