Not sure an address belongs to VilaVPN?Check an address →

مكتبة الشروحات

How do I share this device's proxy with another device on the same network?

To share this device's proxy with another device on the same network, turn on Share Proxy on LAN in VilaNet, then set the other device's HTTP or SOCKS5 proxy to the address shown on the screen. Both devices must be on the same network. Copy the address the app shows. Do not type a port of your own.

Turn sharing on for this device

  1. Open VilaNet and connect. The other device's traffic is forwarded through this device's VPN connection.
  2. Go to Settings > Connection > Local Proxy / Network Sharing.
  3. Turn on Share Proxy on LAN.
  4. The screen shows the LAN proxy address. Tap it to copy. The other device uses that address, not one you invent.

The local proxy port already documented is 10081. It handles both SOCKS5 and HTTP. It is active in desktop Proxy mode, or when Network Sharing is on. Turning on the share switch is turning Network Sharing on. If the address on the screen does not match what you remember, use the screen. How the modes differ is in TUN mode or proxy mode: which should I use?.

Fill in the other device

  1. Confirm it is on the same network as the device running VilaNet. The feature does not work across two networks.
  2. On that device, open Wi-Fi or network settings and find the HTTP proxy or the SOCKS5 proxy.
  3. Follow the instructions on the VilaNet screen. When they say HTTP or SOCKS5, use the address string on the screen for both host and port. Do not change the port after you split the address apart.
  4. Save, then open an ordinary web page on that device.

To point Telegram on a Mac at the local proxy by hand, use How to use telegram on a Mac. That page does not replace LAN sharing. On desktop, in Proxy mode, the Telegram proxy buttons open Telegram and fill in VilaNet's SOCKS5 proxy. Those buttons are not the LAN share.

How to tell the share worked

All three are true: the devices are on the same network; Share Proxy on LAN is on and the other device uses the address from the screen; with VilaNet Connected on this device, the other device can open a web page. That device's traffic is then forwarded through the VilaNet connection on this device.

Still not working?

  • The address was copied earlier, and the devices are no longer on that network: join the same LAN again, then copy the new address from the screen. The address follows the network this device is on.
  • The existing local-proxy note also says to turn off firewalls, antivirus software, and other proxies. That sentence is in the Telegram article linked above.
  • A printer, NAS, or the router page stops opening: that is a different task. Local devices should stay off the tunnel. See Why can't I reach my printer, NAS or router page with the VPN on?. Sharing sends another device through this proxy. That article keeps LAN devices on the LAN.
  • 0 أعضاء وجدوا هذه المقالة مفيدة
هل كانت المقالة مفيدة ؟

مقالات مشابهة

Cannot use the proxy on Firefox

Firefox does not always follow the system proxy, so it can show no connection while other apps...

Error code: "error: spawn unknown"

This error, fully known as "error: spawn unknown," typically occurs because VS Code cannot locate...

Can't access the internet on Windows after configuration?

Why does Windows show successful configuration but still can't access the internet?   First,...

v2rayN has stopped working on Windows

If you encounter "v2rayN has stopped working."   It may be due to an outdated version of...

It seems like an unknown error has occurred: Error: Command failed sysproxy.exe

It seems like an unknown error has occurred: Error: Command failed sysproxy.exe   Please check...